| APX28HA SATELLITE |
|
| System |
2-way full range, Active Array Element |
| AMP Power |
800W Continuous, Bi-AMP (Class D-650 W LF, Class AB-150W HF), 3200W Peak |
| Speaker |
2 x 1” Celestion Neodymium Compression Driver, 1.75” Voice Coil, -80W-RMS / 320W-Peak, Horn loaded / 2 x 8” Celestion Neodymium MID Woofer, Water Resistant Coating, 2“ Voice Coil, 400W-RMS / 1600W Peak, with Wave guide |
| Frequency Response (+/-3dB) |
70 Hz – 19 kHz |
| MAX SPL @ 1m |
121dB (continuous) / 127dB (peak) |
| Crossover (MID-High) |
1.8 kHz |
| Dispersion (-6dB) |
110º Horizontal / 10° Vertical |
| Cooling |
Passive Cooling + Inside Fan |
| Input Connector |
XLR In / Link / DSP Module with RJ45 Date In & Link Cascading Connector |
| External Controls |
9 Preset EQ / 1 Service Use / Power ON with Green LED / Clip / SIG / PROT With LED |
| DSP Processor |
32 bit , 24bit/48kHz Audio conversion AD/DA, Digital Volume Control |
| Electronic Protections |
Thermal / Convection-Fan / Overload / Digital Limiter / Compressor |
| Mains Connector |
Neutrik PowerCON Connector In & Out |
| Mains Connector |
16A UL & VDE & SEV |
| Power Supply |
Auto-Range 100V-120V / 220V-240V 50Hz/60Hz |
| Enclosure Construction |
18mm Birch Plywood, Resistant Black Paint, 1.5T Metal Grille with Foam, Two Handles on Each Side, Water Resistant Coating |
| Mounting |
3-point Suspension, Horizontal Trapezoid 2 x 7.5°, Three configuration styles (Small, Stack & Array) |
| Dimensions (HxWxD) |
260 x 640 x 470mm |
| Net Weight |
22.5 kg / 49.5 Ibs |
| Accessories |
Flybar / Adaptor / Ground stacking bar / Flying Pin / DSP control center |
